Die casting island system integration case
1. The die-casting island unit is composed of spraying robots, spraying robots, spraying pipeline systems, pickup robots, pickup robots, product inspection, cooling water tanks, slag machine, hydraulic trimming machine, product conveyor line, safety fence, system control cabinet And other composition.
2. After the die-casting machine opens the mold, the spraying robot moves to the top of the mold and waits. After the product is taken out, the spraying robot descends into the mold to spray the release agent and dry the mold. After the spraying is completed, it returns to the standby position and waits for the next mold opening.
3. The pickup robot takes the product out of the mold and inspects the integrity of the product, and puts the detected product in the slag bag machine to remove the slag bag of the product. After the product slag bag is removed, the robot removes the product from the slag bag machine And put it into the cooling water tank for cooling. After the product is cooled and blown dry, the robot puts it into the hydraulic edge trimmer to cut the cake, and the trimmed product is taken out and discharged on the conveyor line.
It has a high protection level. The protection level of the robot's one, two and three axes is IP65, and the four, five and six axes are IP67. On the basis of high protection, an integrated enclosed protective cover design is added to further improve the protection performance of the machine. The robot adopts a high configuration design, which is stable and reliable. It can be used for picking, spraying, transporting, palletizing, etc. The performance is close to the four major families, but the maintenance cost is greatly reduced, and it has a super high cost performance.